SWX-1043D

10" Subwoofer

SWX-1043D 10

Speaker Rating:
Max RMS Power Capacity: 1000W
Peak Power Capacity: 3000W

Extreme Performance.

If you are looking for a high-quality subwoofer with the most accurate and precise in-vehicle subwoofer performance, then look no further. Alpine's 2nd generation state-of-the-art Type-X Subwoofers are your answer. With the advanced motor structure and new sound of these subs, you will experience higher efficiency, lower heat creation while maintaining superb sound, so you can really crank up the bass.

Contact An Expert

Price: U.S. $530.00
(Now Available)

Professional installation available at authorized retailers.

Overview

New Aerospace Cone Material

The Type-X cone uses new advanced aerospace materials such as Kevlar-Rohacell® parabolic cone for outstanding strength and light weight. These lighter materials minimize moving mass for greater output efficiency than ever before.

HAMR Engineering

Type-X subs are built with HAMR engineering, Alpine's exclusive subwoofer solution for cooler operation, longer life and tight accurate bass. Type-X subs are the way go.

Specifications

Features and Specification

SPECIFICATIONS

Power Handling
  •  Power Range: 500 - 1000 Watts
  •  RMS Power Handling: 1000 Watts
  •  Peak Power Handling: 3000 Watts
Dimensions
  •  Mounting Depth: 218 mm (8.6'')
  •  Mounting Diameter: 231 mm (9.1'')
  •  Displacement: 0.162 cu. ft. (Front Mount)
  •  Added Volume: 0.062 cu. ft. (Reverse Mount, Magnet Out)
General
  •  Frequency Response: 26Hz - 200Hz
FEATURES

Diaphram
  •  Material: Kevlar RohacellA? Layered Composite
  •  Design: 1-Piece Parabolic with Vented Force Transfer Assembly
Surround
  •  Material: Injection Molded SantopreneA?
  •  Design: High Amplitued Multi-Roll (Patent Pending)
Spider
  •  Material: NomexA?
  •  Design: Mirrored Progressive
Voice Coil
  •  Material: 220A?C Aluminum Wire on Twin-Wall Aluminum Former (Patent #6,292,079)
  •  Design: 6-Layer Dual 4I? Voice Coil with Inner/Outer Winding
Motor Structure
  •  Pole Geometry: Compound Radius Curve (Patent #6,639,993) with T-Drive
  •  Configuration: Billet Copper Shorting Sleeves with Heat Dissipation Plate (Patent Pending)
Frame
  •  Material: Cast Aluminum
  •  Design: Perimeter Vented Exo-Frame (Patent Pending) with Integrated Spider Landing (Patent #6,678,387)
Terminals
  •  Layout: One Side
  •  Design: Insert Terminal Blocks with High Current Voice Coil Configuration Jumper
Tinsel Leads
  •  Design: Reinforced Layer Spider Integration (Patent #6,810,988)
Gasket
  •  Design: Concealed Mount Design with Front/Rear Sealing Gaskets

Documents